사양 및 비고
- 등급: 304 · 304L · 316L · 321 · 201 · 430 · 409 · 2205 (요청 시)
- 마감: 2B · BA · No.1 · No.4 · HL · 8K · 엠보싱 (요청 시)
- Standard: ASTM A240 · EN 10088-2 · JIS G4304/4305 · GB/T 3280
- 포장: 목재 / 강재 팔레트, 모서리 보호대, PVC 필름 (요청 시)
범위는 일반적인 기준이며, 계약서 및 기술 협약이 우선합니다.
조명 및 하드웨어 서클 견적이 필요하신가요?
등급, 두께, 폭, 수량 및 도착항을 보내주시면 24시간 이내에 FOB / CIF 견적을 제공해 드립니다.
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Lighting — downlight reflectors, lamp pans, housing bases
- Hardware — lock plates, hinge shims, decorative caps
- Appliance parts — heating plates, fan guards
Selection FAQ
- Will thin gauge crack when stamped?
- It depends on the draw ratio and the die. 0.3–0.5 mm 304 draws well for shallow parts; for deep drawing use 304 rather than 201.
- Can the discs be pre-polished?
- Yes on request, but polishing before stamping tends to leave die marks — normally the part is formed first, then polished.
Not sure which grade fits? Use the grade selector