사양 및 비고
- 등급: 304 · 304L · 316L · 321 · 201 · 430 · 409 · 2205 (요청 시)
- 마감: 2B · BA · No.1 · No.4 · HL · 8K · 엠보싱 (요청 시)
- 규격: ASTM A240 · EN 10088-2 · JIS G4304/4305 · GB/T 3280
- 포장: 목재 / 강재 팔레트, 모서리 보호대, PVC 필름 (요청 시)
범위는 일반적인 기준이며, 계약 및 기술 협약이 우선합니다.
워터젯 절단 부품 견적이 필요하신가요?
강종, 두께, 폭, 수량 및 도착항을 보내주시면 24시간 이내에 FOB / CIF 견적을 제공해 드립니다.
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Thick shaped parts — flanges and connection plates from 20–80 mm
- Heat-sensitive parts — precision parts that must not distort
- Laminates and stacks — stainless cut together with other materials
- Food and medical equipment — cut faces with no heat-affected zone
Selection FAQ
- Waterjet or laser?
- Laser for sheet up to about 12 mm and tight tolerance — faster, narrower kerf. Waterjet for thick plate, heat-sensitive parts, and where a heat-affected zone is unacceptable.
- How rough is the waterjet cut face?
- Typically a matte finish around Ra 3.2–6.3. Slower cutting gives a smoother face at higher cost.
Not sure which grade fits? Use the grade selector