可供规格
| 钢种 | 厚度 | 宽度 / 直径 | 标准 |
|---|---|---|---|
| 304 · 316L · 430 · 2205 | 3–80 mm | ≤ 3000 mm | ASTM A240 / EN 10088-2 |
所示范围为标准供货范围，非标尺寸可定制生产。厚度为公称厚度，公差按ASTM A480 / EN 10088-2判定。
典型应用领域
- 支架、支撑件及机械防护罩
- 储罐接管、挡板及法兰
- 装饰性筛网及穿孔面板
交付与检验
- 激光 ±0.1 mm，水刀 ±0.2 mm，水刀无热影响区
- 可按要求进行去毛刺、边缘预处理及钝化处理
- 提供DXF/DWG文件即可报价 — 询价时请发送图纸
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Robotics — outer covers, mounting plates, guard brackets
- Automation — frame panels, rail mounting plates, fixture locating plates
- Kitchen and appliances — pierced panels, decorative parts
- Architecture — perforated screens, signage, shaped trims
Selection FAQ
- What tolerance does laser cutting hold?
- ±0.1 mm as standard; tighter on thin precision parts, looser on thick plate because of heat effects and kerf taper — assessed against your drawing.
- Why is stainless steel common for robot housings?
- It depends on the environment: cleanroom, food, medical and outdoor applications often use 304/316L because it withstands cleaning agents and moisture. For ordinary industrial settings, powder-coated cold rolled steel is more economical.
- Can you cut directly from drawings?
- Yes — DXF / DWG / PDF. Please state material, thickness, quantity and surface requirement when enquiring.
Not sure which grade fits? Use the grade selector