사용 가능한 사양
| 강종 | 두께 | 폭 / 직경 | 표준 |
|---|---|---|---|
| 304 · 316L · 430 · 201 | 3–3 mm | ≤ 1500 mm | ASTM A240 / EN 10088-2 |
표시된 범위는 표준 공급 가능 범위이며, 비표준 사이즈는 주문 제작 가능합니다. 두께는 공칭 두께이며, 공차는 ASTM A480 / EN 10088-2에 따라 판정됩니다.
대표적 용도
- 가전제품 및 주방기기
- 엘리베이터 및 인테리어 트림
- 스탬핑 및 딥드로잉
납품 및 검사
- 2B: Ra 0.2–0.5 μm; BA: Ra 0.05–0.2 μm
- 평탄도 확보를 위한 스킨패스 처리, 직접 필름 적용에 적합
- 표면 등급은 ASTM A480에 따라 판정 — 색상 및 스크래치 분쟁 시 근거 확보
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Kitchen equipment — sinks, hob panels, range hood shells, commercial fridge liners
- Home appliances — washing machine drums and panels, microwave cavities, steriliser racks
- Architecture — elevator door frames and car panels, façade trims, balustrades, handles
- Food and pharma — filling line tables, tank liners, cleanroom wall panels
- Consumer goods — vacuum flasks, cookware, cutlery, bathroom fittings
Selection FAQ
- Should a kitchen sink be 304 or 316 stainless?
- 304 is enough for domestic use. For coastal areas, or where salt and detergent sit on the surface, 316L lowers the pitting risk.
- What is the difference between 2B and BA finish?
- 2B is cold rolled, annealed, pickled and skin-passed — a matte silver-grey. BA is bright annealed: more reflective, closer to mirror, slightly higher cost.
- Does stainless steel rust?
- "Stainless" is relative to carbon steel. Chlorides (salt, bleach) and scratched surfaces are the main triggers; in coastal or chemical environments upgrade 304 to 316L.
Not sure which grade fits? Use the grade selector