사양 및 비고
- 등급: 304 · 304L · 316L · 321 · 201 · 430 · 409 · 2205 (요청 시)
- 표면 마감: 2B · BA · No.1 · No.4 · HL · 8K · 엠보싱 (요청 시)
- 규격: ASTM A240 · EN 10088-2 · JIS G4304/4305 · GB/T 3280
- 포장: 목재 / 강재 팔레트, 모서리 보호대, PVC 필름 (요청 시)
범위는 일반적인 기준이며, 계약 및 기술 협약이 우선합니다.
맞춤형 용접 구조물 견적이 필요하신가요?
강종, 두께, 폭, 수량 및 도착항을 보내주시면 24시간 이내에 FOB / CIF 견적을 제공해 드립니다.
Typical applications
Below is where this material actually ends up — the specific parts, not just the industry. Compare it with your own service conditions, or send us the environment and we will advise.
- Machine frames — folded and welded bases, columns, beams
- Guarding — machine guards, safety fencing
- Tanks and boxes — control boxes, hoppers, sinks
- Conveying and storage — chutes, trays, tote bins
Selection FAQ
- Will it distort after welding?
- Yes — stainless has low thermal conductivity and high shrinkage. Balanced, staggered welding with fixtures is the usual approach; visible parts may need straightening or machining after welding.
- Is post-weld pickling needed?
- Recommended. Welding destroys the passive layer and leaves heat tint; pickling and passivation restores corrosion resistance, especially on 316L and duplex.
Not sure which grade fits? Use the grade selector